Menu
Cart

News — beach

How to set up the Garrett AT MAX for the beach

Posted by Detector Warehouse at

Here is a good set up for running the Garrett AT MAX on the beach. (1) Press and hold the power button until it peeps twice; this will reset the detector.(2) lower the sensitivity on notch (bringing it 3 notches down from maximum) you will still get good depth.(3) Select zero mode.(4) Set iron disc to 43.(5) Set threshold to negative 3(-3).(6) Coil in salt water or wet sand auto ground balance the machine.(7) manually lower the ground balance by 2 or three.Follow these steps the Garrett AT Max should run quieter on the sand and in the salt water...if...

Read more →